Harwin Z30-020 Uživatelský manuál stáhnout pdf

IS-13 Issue: 3 Date: 03.10.07 C/Note: 9874 Page 1 of 4

HAND CRIMP TOOL Z30-020

This Hand Crimp Tool has been designed for use with the following crimp contacts:

M30-1000046................................ 1.25mm Pitch Crimp Contacts, Reeled, Tin

M30-1010046................................ 1.25mm Pitch Crimp Contacts, Strip of 10, Tin

TOOL DESCRIPTION

The Z30-020 Hand Crimp Tool consists of a ratchet mechanism hand tool and a set of jaws. The

jaws comprise of upper and lower crimp dies.

The contact is correctly crimped when the tool is free to open at the fully closed position, i.e.

when the ratchet releases.

Harwin North America Harwin Europe Harwin Asia

T: +1 603 893 5376 F: +1 603 893 5396 T: +44 (0) 23 9231 4545 F: +44 (0) 23 9231 4590 T: +65 6 779 4909 F: +65 6 779 3868

E: [email protected] W: www.harwin.com E: [email protected] W: www.harwin.com E: [email protected] W: www.harwin.com.sg

1 2 3 4

IS-13 Issue: 3 Date: 03.10.07 C/Note: 9874 Page 1 of 4 HAND CRIMP TOOL Z30-020 This Hand Crimp Tool has been designed for use with the f

IS-13 Issue: 3 Date: 03.10.07 C/Note: 9874 Page 2 of 4 CRIMPING PROCEDURE 1. Ensure that the wire to be crimped is within the specified r

IS-13 Issue: 3 Date: 03.10.07 C/Note: 9874 Page 3 of 4 7. Push the contact until the contact touches the stopper-block. Check that the c

IS-13 Issue: 3 Date: 03.10.07 C/Note: 9874 Page 4 of 4 INSPECTION The contact’s mating dimensions can be checked after crimping by gauge p

Žádné komentáře

Harwin Z30-020 Uživatelský manuál